Troubleshooting and Accessing IP Cameras
Changing Network Settings
To modify IP settings for WEB cameras via CAMS network, follow these steps:
- Navigate to the camera's TCPIP settings.
- Change the static IP to 192.168.100.201.
- Set the subnet mask to 255.255.255.0.
- Enter 192.168.100.1 as the gateway.
- Set the preferred DNS to 192.168.100.1.
Accessing Dahua Cameras
To access Dahua IP cameras:
- Go to the camera's login page.
- Click on the "extensions" icon located in the address bar.
- Additional buttons for camera controls should appear.
Securing Dahua Cameras
To enhance security for Dahua cameras:
- Enable "Illegal Login Lock" to lock the device after five failed login attempts.
Troubleshooting Brillcam Cameras
If you experience issues with Brillcam cameras after a firmware upgrade:
- Confirm that the cameras are still accessible in Blue Iris.
Troubleshooting Escam QD300WIFI Cameras
To troubleshoot Escam QD300WIFI cameras:
- Check if the camera is in hang mode.
- Attempt to access the camera's web administration interface.
Accessing Cameras with Overtime Login Issues
If you receive an "Overtime Login" message:
- Use Google Chrome instead of Internet Explorer to access the camera.
Resetting Amcrest Camera Passwords
To reset the password for an Amcrest camera:
- Use the camera's web interface and Internet Explorer.
- Navigate to the VIDEO tab and locate the login and password information.
Troubleshooting H264 DVRs
If your DVR only supports H264:
- Use the Yale brand and HD720 model in the Tiny Cam app.
Komentar